SPEL TF 20 & SPEL TRANS C 410, C 430.

Next > >

<< Previous

Send Inquiry

Product Code : 02

Product Description

SPEL TF 20

This is an Automatic Transmission Fluid specially formulated to meet J 20A of John Deere specifications. Recommended for use in Torque Converters, Transmission & Hydraulic systems fitted in Tractors & other Farm equipments.

Following tables depicts various test parameters of the transmission oils :

TESTS	SPEL TF 20
Viscosity, cst @ 100^oC	9-10
Viscosity Index, Min.	125
Flash Point, COC, ^oC Min.	235
Pour Point ^oC Max.	-27
Cu Strip Corrosion @ 100^oC for 3 hrs, Max	1a
Rust test, 24 hrs with Synthetic sea water	Pass

These are typical figures and do not constitute a specification.

SPEL TRANS C 410, C 430

These oils are Transmission Oils meeting C-4 service classification of Allison Transmission division. They have an added advantage over conventional C-3 series. These oils meet severe oxidation stability and superior non- asbestos clutch friction tests. They have fluoro-elastomer seal compatibility and more demanding Anti-Foam and Anti-Copper Corrosion requirements due to superior performance level. These oils give trouble free longer drain period. These oils are recommended for all commercial Power shift Transmissions, Industrial Torque converters and Automatic Transmissions manufactured by Detroit Diesel Allison.

Following tables depicts various test parameters of the transmission oils :

TESTS	SPEL TRANS C 410	SPEL TRANS C 430
Viscosity, cst @ 100^oC	4-6	9-12
Viscosity Index, Min.	100	100
Flash Point, COC, ^oC Min.	200	235
Pour Point ^oC Max.	-21	-15
Ash, Sulphated, %wt, Max	1.22	1.22
Acidity Total, mg KOH/gm	2.1	2.1
Total Base Number, mg KOH/gm, Min	9	9
Cu Strip Corrosion @ 100^oC for 3 hrs, Max	1	1
Rust test, 24 hrs with Synthetic sea water	Pass	Pass